Easy To Use Self Defense - TASER C2

By Jim Wilkinson

If you have already bought a TASER C2 you probably are aware how easy it is to use. You probably took the time to read the owner manual and watch the training DVD that comes with each TASER C2. By doing this you became familiar with the most effective way to use the TASER C2. If you have just purchased your TASER C2 make sure you take the time and go through the training DVD and owner manual as soon as it arrives.

The way the TASER C2 gets power is by using a Lithium battery cartridge. This cartridge is very well designed and contains enough energy to power the TASER C2 for 50 firings. Make sure before you put the battery cartridge in that you have not inserted the magazine cartridge first. You don't want to do that. Always place the battery cartridge in first followed by inserting the magazine cartridge. When you have both cartridges in correctly you will see a green light. This signifies that your TASER C2 is ready for action.

The next thing you need to do is load your air cartridges. Make sure the safety switch cover is closed and that the TASER is pointing in a safe direction. Remove the cartridge cover at the front of the C2 and insert the cartridge until you hear it click. That indicates it is locked in place. Just to make sure, gently pull on the sides of the cartridge. There is not an "up" or "down" on the air cartridges so you don't have to worry about putting the cartridge in wrong. This is also a nice feature for when you are under any stress so you can reload quickly if needed. Each cartridge carries the probes, wire, and compressed air. Do not try to open these cartridges.

Do not try to imitate the fancy hand positions we see on TV shows when someone is using a gun when you use the TASER C2. Always hold it just like you would a handgun, vertically. Slide the safety cover back so that the firing button is now exposed and aim at the assailant. Every TASER C2, except one model, comes equipped with a built in laser sighting device. This laser will place a red dot on your assailant when you point it at him. This dot represents the approximate landing position of the top probe. Try to shoot for the chest area. Make sure you are within 15 feet of your attacker. That is the maximim range of the TASER C2 probes.

You do not need a tape measure but always try to shoot your TASER C2 when you are about 7 to 10 feet away from your attacker. This will result in a good spread of the probes, about 16 inches, and deliver the most effect. Try not to have a probe spread of less then 4 inches. Remember, maximum effect occurs between 7 and 10 feet.

Practice, practice, practice. Targets are available so that you can practice using the device. Never practice on someone as the TASER shoots two small barbs that will penetrate clothing and skin and deliver the volts and wattage to the body. Practice in an empty room and make sure no one can come in unexpectedly.

There is also a stun capability backup on the TASER C2 called the Drive Stun Back Up. This means that if you just happen to run out of cartridges and you still need to disable an attacker you can approach the person and use the stun gun functionality. The TASER C2 has two stun gun electrodes that will allow you to depress the volts into the attacker's neck or other exposed body part and then make your escape.

As soon as your attacker is on the ground and incapacitated, place the TASER C2 on the ground and run away to a safe location. Do not try to retrieve your TASER C2. TASER International will replace your C2 if you send them a copy of the police report of your attack. - 29956

About the Author:

Sign Up for our Free Newsletter

Enter email address here